Amino Silicone Oil Emulsifier

Procedure to Use ( For 100 kg Batch ) -

• Take 25 kg Amino Silicone Fluid.
• Now add 12 kg of our emulsifier FX AMS 80 to the above fluid and mix well with a stirrer till all the emulsifier is mixed in the fluid and a thick paste is formed.
• Now slowly add water step by step at 2-5 litres per minute upto 100 litres .
• If the solution is little hazy , add a very little amount of acetic acid till the solution becomes clear .
• The Emulsion formed will have good thickeness and will be clear and transparent in appearance.
• This process of making amino silicon fluid emulsion is much easier and cheaper than the conventional ways.

Precautions:

• Acetic acid should only be added to make the solution clear .
• The above process should be followed very strictly.
• Take soft water for longer stability of the product.